 |
 |
 |
|
SPC Performance's arm shim kit is the first on the market to provide a substantial amount of positive camber change. It has more than enough camber and caster change to correct cars that have been lowered, or for vehicles used in drifting. These new arms allow for precise changes when fine tuning suspension alignment angles necessary when racing or drifting. The hub and caliper shims extend out the center of the wheel making it possible for the forged and fabricated arm to make up to 5 degrees total camber change and +/- 1 deg. of caster change. Using a sliding and rotating ball joint, techs can fine tune both camber and caster to save tires and improve your handling and tire to surface contact. The kit includes everything you need, including the ABS sensor bracket, shims, and arms for both sides of the vehicle. Fits G35 and 350Z applications.
Adjustment Information:
Camber -1.5 degree to +3.5 degree Caster ±1.0 degree
Installation Time: 1.8 hr/side
Required: 1 kit per axle
APPLICATIONS
2003 - 2007 G35 Coupe
2003 - 2006 G35 Sedan
2003 - 2008 350Z
|
|
|
|
|
|
|
